CAT40 TOOLING PACKAGE ER32 ER16 COLLET SET, COLLET CHUCK, END MILL HOLDER AND DRILL CHUCK FIT ON ANY HAAS CAT40 SPINDLE
BRAND NEW
Accuracy in Couple Tenth On Collet and Chuck Together
High Speed True Balance in 15-20K RPM
6PC END MILL HOLDER
5PC ER32 COLLET CHUCK
3PC ER16 COLLET CHUCK
12PC ER32 COLLET SET BY BOTH 1/16
7PC ER32 COLLET SET COMMON SIZE
10PC ER16 COLLETS SET BY 1/32
2PC Keyless Drill Chuck 1/2"
With Free HAAS or Mazak pull stud
FREE SPANNER WRENCH ON COLLET CHUCK
ALL END MILL HOLDER, COLLET CHUCK AND DRILL CHUCK ARE HIGH SPEED PROVED AND BALANCED TO G2.5 @ 20K RPM TO MEET ALL INDUSTRIAL REQUIREMENT
Free Shipping in US
This is my chuck and collets, see two videos below, indicator is the same 0.0001". Total run out of holder and good set of collets are less than 0.0005", tool holder alone without collets are 0.0001". Since it's balanced, so regardless of speed, holder and collets will running true. Both tool holders and collets must be running true in order get total run out to minimum
cat40er321
Using the mobile app? Copy this link into your browser:
cat40er3211
Using the mobile app? Copy this link into your browser:
Features:6PC CAT40 End Mill Holder- Projection Length: 2.5"
- 6PC Common Size: 1/4, 3/8, 1/2, 5/8, 3/4, 1"
- Precision high speed end mill holder for durability and rigidity
- Holder balanced for accuracy
- Provides a very close tolerance fit with minimum runout between the tool holder's bore and the cutting tool
- Thru Hole of the tool holder allows the use of Thru Coolant Tools when used with a Thru Coolant retention knob
5PC CAT40 ER32 Chuck
3PC CAT40 ER16 Chuck- Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75"
- Accuracy in Tenth, 0.0001"
- Fully ground flange and V-groove — easy on tool changers for less spindle and
- changer maintenance
- V-Flange CAT 40 is production balanced to high speed spindle turning and meet standard industrial needs
- High Speed True Balance in 15-20K RPM
- Hardened and ground to ensure maximum accuracy
- Through spindle coolant capability from pull stud to collets
12PC ER32 Collets Set By 1/16:
7PC ER32 collets in common size:
- Made of high grade spring steel
- Ground roughness is Ra0.4 Microns, plus overall fine polish
- 12PC by 16th: 1/8"; 3/16"; 7/32", 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 9/16"; 5/8"; 11/16"; 3/4"
- 7PC Common Size: 1/8, 1/4, 5/16 , 3/8, 1/2, 5/8, 3/4.
- T.I.R.: 0.0003" or 5um. In order to make all collets running true, on your side, make sure your machine spindle and chuck holder running true, on my side, I'll make sure all those collets running in tenth.
- Special angled slots increase rigidity
- Better overall balance of tool holder assembly
- Protects tool holder from contaminants
- Use with any standard ER collet chucks for coolant-thru tool applications.
2PC 1/2" Precision Keyless Drill Chuck - Keyless Drill Chuck Capacity, 1/2".
- Drill chuck has very strong holding power.
- All Jaws are Hardened
- V-Flange CAT 40 is production balanced and meet standard industrial needs
10PC ER16 Collet set by 1/32
- Made of high grade spring steel
- 10PC Size: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8"
- T.I.R.: 0.0003" or 5um. In order to make all collets running true, on your side, make sure your machine spindle and chuck holder running true, on my side, I'll make sure all those collets running in tenth.
- Special angled slots increase rigidity
- Better overall balance of tool holder assembly
Free Items Included in this pacakge:
- Free HAAS or Mazak CAT40 pull studs
- Free ER Spanner wrench
- Free Shipping in US
All items include:
6PC common size end mill holder, 5PC ER32 chuck, 3PC ER16 chuck, 12+7PC ER32 collets, 10PC ER 16 collets, 2PC drill chuck and more
It's a value and quality HAAS tooling package, all chucks and holders have been high speed pre-balanced to G2.5 @ 20K RPM, all collets are in 0.0003", any questions, let me know
Total Run out
Total runout is a sum of runout of collets, chuck or holder, and machine spindle. On CAT40 or BT40 spindle, you're expecting half thousands overall runout with these collets and collet holder. So collets alone is about 3 tenth, then you add chuck run out 1 or 2 tenth, it comes up about half thousands or 5 tenth, so choose correct tooling for correct application
